Nozzle not spraying

Dryer working good, Side Control not working



Make sure there is full water flow at the bidet Water Inlet Connector.

  

Remember:

The first thing to do, before disconnecting anything, is to:

1) Check if all the water tap (wall and T-Piece) are fully opened. Many times they get closed by mistake during cleaning or other

2) Check if the filter is clean and properly installed. Take it Off and put back In. Many times it get touched by mistake during cleaning or other and if  the filter is not fully locked in the water can not go through.

 

Did you have a good water flaw at the Bidet Water Inlet Connector when first checked?

Yes
No